Window Trim Project

IMG_6070

We’ve started another project that was on my ‘ home improvement to do’ list . This time it is trimming out the windows in the back of our home.

I think some builders cut corners with less trim work as to save money and knowing the house will sell anyway just trim the windows in the front of the house and not the back. That was the case at our house.

Front :

DSC_0011

Back:

DSC_0005

Somehow to me it just looked unfinished. We didn’t want to start a huge project but wanted to add some detail to the back of our house we thought this would help. So the project began yesterday.

Before:

DSC_0007

So far:

DSC_0009

This is just the beginning as we have 2 stories and the windows on the deck area to be wrapped and trimmed.

Here is where I need your help :

DSC_0007

We are not sure how to trim out this area. Sort of a bay window ( there’s a 3rd window you can’t see from this photo on the far right side) and the windows aren’t evenly spaced from the corners. I am thinking we take off the white trim and totally retrim it as one big window and then we add the trim on the corners as needed above and below the window trim. We would need wider boards to cover the spaces between the window and the corners and no siding would be shown in the window area. Does that make sense? I don’t exactly know how to describe it and really not sure that is the best approach. I could really use some advice, needed before Saturday as that is when our friend will be back to finish up. HELP!

A friend of mine has this around a group of windows at her house:

IMG_6067

Her home is one where they didn’t cut corners and the details are amazing. I am hoping for neat and finished with improvement from the current appearance.

Please post your suggestions and if you can attach a photo. I have searched Houzz and Pinterest and still can’t find a photo of exactly what I should do.

Thanks for any suggestions you may have,

Linda

Advertisements

Folding Chair Makeover

I was kicking around these old folding chairs in our garage for years and didn’t have the heart to throw them out but only used them when I was desperate for additional seating. I have World Market wooden folding chairs as well and they were the ones I grabbed first if needed while these metal ones sat collecting cobwebs and dust in the garage.

DSC_0012

Until I saw someone had posted a repainting project with metal folding chairs. Viola’ ! ‘Light Bulb’ moment! I can do that!

How come when you get inspired to do something on the fly and get all excited about it, purchase all the needed supplies, it never goes quite as smoothly as you had envisioned? That was the case here.

First I had to remove the cushions so the metal frame could be painted. Well mine were riveted into the frame so they needed to be drilled out. Not thinking that through , but I will explain later.

DSC_0013

Then I ran out and got the paint I wanted to use. 1 can of paint per chair (I had 4).

DSC_0004

Then fabric to cover the cushions. My chairs had a little back cushion and a seat cushion to cover. I used home décor fabric but you could use anything that you think would hold up and not wear our too quickly.

DSC_0005

First I spray painted the chairs, well my sweet husband helped me as he is more experienced at using spray paint than I am and I was having trouble with some drips.

DSC_0023

Then I went about recovering the cushions. So far so good.

DSC_0016

DSC_0019

DSC_0021

DSC_0022

Then here is where things started to get a little frustrating. Time to attach the cushions to the chair. I thought at first I could just use little screws and reattach them… well NO!

Then I realized I needed to purchase a rivet tool and new rivets. I won’t tell you how many times we had to return to the store to get the right size. I will save you the trouble by letting you know you need to get 1/8″ diameter,1/4″ grip( see photo). I have just saved you hours of frustration and wasted time….You’re welcome!

DSC_0005-001

The clips on each cushion that the rivets go into also needed to be drilled out and free of old rivet pieces. ARG! Hadn’t anticipated that.

DSC_0001-001

DSC_0002-001

DSC_0006-001

DSC_0007-001

Once clips were replaced back in the cushions we used the rivet tool to reattach them to the chair frame.

DSC_0001-002

Haven’t decided if I will try and touch them up with paint or not.

Here is the finished project:

DSC_0003-002

I also covered one with a different fabric:  ( it is taped on in this picture getting ready to attach with rivet tool )

DSC_0025

They are pretty cute and I think I will use them more now that they have been ‘whimsified’. I went for colorful and whimsical but you could easily finish them in the color scheme of your choice. How about painted gray with a little yellow chevron stripe? Or you could finish each one in a different color? Or match your home décor ? I think you get the idea.

Now that I have taken the guess work out for you have at it and remake those old folding chairs something you have fun using.

Have a great weekend!

Linda

Linking to :

{Primp}